Passa alle informazioni sul prodotto
1 su 7

EX2918MGX Green

Sincecam 18kg Low Profile High Speed 0.03Sec Brushless Servos (Green)

Sincecam 18kg Low Profile High Speed 0.03Sec Brushless Servos (Green)

Prezzo di listino $79.99 USD
Prezzo di listino $139.99 USD Prezzo scontato $79.99 USD
In offerta Esaurito
Spese di spedizione calcolate al check-out.
  • High Speed & High Torque:The Fastest Speed of This Low Profile Servo is 0.03sec / 60° @8.4V,The Maximum Torque can Reach 18kg-cm (260oz-in) @8.4V,
  • High Quality & Performance:High Performance Brushless Motor,14bit Four Wire Digital High Precision Magnetically Encoded Angle Sensor Instead of Ordinary Potentiometer, Extremely Accurate and Stable,Never Wears.
  • Oblique Gear Servo:Equipped with Patented Reinforced Steel Oblique Gears,More Linear and Smooth Torque Transmission,Full Ball Bearings and All Aluminum Case,Enhance Heat Dissipation,Thereby Reducing Power Consumption.
  • Waterproof Rc Servo:IP67 Waterproof Design,Dustproof,Servo Can Still Work Normally When Immersed in 1 Meter Deep Water for 30 Minutes,Size is 1.57 x 0.78 x 1.14 in.Weight:73g(2.58oz)
  • Steering Servo Application:High Voltage DC6V-8.4V Digital Programmable Servo Compatible with SR / SSR / SUR / SFR,Ideal for 1/8 1/10 1/12 RC Drift car,Speed car,Racing cars
Visualizza dettagli completi

EX2918MGX Low Profile High Speed Servo

Product Description

Sincecam EX29180MGX High Speed Low Profile Brushless Servos,It's the Extreme Series from Sincecam.Adopts High-performance Durable Brushless Motor,14bit Four-wire Digital High Accuracy Magnetic Coded Angle Sensor,±1° Angular Deviation,Fastest Speeds 0.03sec/60°.

Programmable digital servos, factory default is “Standard Mode”,with the EX619BT Pro Programming Card you can change the SR/SSR/SUR/SFR modes and the servo torque,speed,angle,reverse,median,etc.. The remote control must also support SR/SSR/SUR/SFR mode.

This Low Profile Servo Suitable for Professional Competition Players,RC Cars Equipment Players Who Pursue the Ultimate and Extreme,All Aluminum Case,Reinforced Steel Oblique Gear and Three Ball Bearings,Excellent Linearity,Precise Control,Stable,Low-noise,Middle and Bottom Shells Increase the Heat Sink Process,So that the Internal Structure of the Servo Absorbs Heat Evenly and Runs Smoothly. Which Makes Your Model Give Full Play to its Handsome Charm.When You Travel Through the Mountains and Pass by the Charming Streams,IP67 Waterproof Dustproof Design Allows Your Model to Play with the River.

Suitable for 1/8 1/10 1/12 RC Cars,Crawler,Buggy,Monster Car,Robot,Boat,Airplane,Helicopter,On-road,Off-road Upgrade Kits.

  • Three Ball Bearings.
  • Reinforced Steel Oblique Gears.
  • High Efficiency Long Life Brushless Motor.
  • IP67 Waterproof Dustproof Design.
  • Body size shortened to 29mm.
  • Compatible with SR/SSR/SUR/SFR.
Available for Parameter Programmable via EX619BT Pro Programmer.

Stall Torque
  • 6.0V@ 12kg-cm (166.5oz-in)
  • 7.4V@ 16kg-cm (222oz-in)
  • 8.4V@ 18kg-cm (250oz-in)
Operating Speed
  • 6.0V@ 0.04ec / 60°
  • 7.4V@ 0.035sec / 60°
  • 8.4V@ 0.03sec / 60°
Idle Current
  • 6.0V@ 15mA
  • 7.4V@ 20mA
  • 8.4V@ 25mA
Running Current (no load)
  • 6.0V@ 300mA
  • 7.4V@ 400mA
  • 8.4V@ 450mA
Stall Current (at locked)
  • 6.0V@ 4200mA
  • 7.4V@ 5500mA
  • 8.4V@ 6000mA
  • Operating Angle:180° ±1°(14bit ENCODER)
  • Control System:PWM Control(1520 uSec in the central point)
  • Pulse Width:500 to 2500 uSec
  • Working Frequency:50-2000Hz
  • Dead Band:2uSec
  • Operating Tamperature:-20℃~+70℃
  • Bearing:Three Ball Bearings
  • Horn Gear Splial:∅6.0-25T
  • Connector Wire:22AWG 300mm JR Silicone Wire
  • Dimension:40x20x29mm(1.57 x 0.78 x 1.14in)
  • Weight:73g (0.16 Pounds)
Package Included
  • 1 x Low Profile Servo
  • 1 x 25T Metal Arms
  • 2 x Screw M2x8
  • 2 x Screw M3x6

EX2918MGX Low Profile Servo

EX2918MGX Low Profile Brushless Servo Parameter Table and External 2D Dimensions File Download


Design your own Sincecam RC servo, laser engrave your favorite servo with your own text or pattern content.

Related Accessories