Sincecam servos are shipped with the remote control signal defaulting to 500 to 2500uSec.
The remote control signal supports 500 to 2500uSec. The control angle of the servo is as follows:
180 degrees: Left 90° Right 90°.
270 degrees: Left 135° Right 135°.
360 degrees: Left 180° Right 180°.
If your remote control signal supports 1000 to 2000uSec. then the control angle of the servo is as follows:
180 degrees: Left 45° Right 45°
270 degrees: Left 67.5° Right 67.5°.
360 degrees: Left 90° Right 90°
If you have questions about this issue, please contact us:support@sincecam.com