Gå til produktoplysninger
1 af 7

EX1650MGX Black 2023

Sincecam 50kg High Speed Waterproof Digital Brushless 8.4V Steering Servos (Black)

Sincecam 50kg High Speed Waterproof Digital Brushless 8.4V Steering Servos (Black)

Normalpris $69.99 USD
Normalpris $99.99 USD Udsalgspris $69.99 USD
Udsalg Udsolgt
Levering beregnes ved betaling.
Edition
  • High Speed Servo:50kg RC Toys Brushless Motor Steering Servo 1/10,Fastest Speed 0.08sec/60°@8.4V,Maximum Torque of 50kg-cm(514oz-in)@8.4V.
  • Programmable Brushless Servo:Speed,Torque,Angle,Direction,Endpoint,Neutral Position can be Adjusted by Programming Card.Compatible SR/SSR/SFR.
  • 1/10 Waterproof Servo:IP67 Waterproof Design,Dustproof,Servo Can Still Work Normally When Immersed in 1 Meter Deep Water for 30 Minutes,Size is 1.57x0.78x1.5in(40x20x38mm),2.8oz (80g)
  • All Metal Servo:Super Strong Steel Helical Gears,Stable,Low Noise,Advanced Linearity and High Precision.All Ball Bearings,Full Aluminum Case,Fast Heat Dissipation,Good Anti Collision Performance,Reliable and Durable.
  • RC Steering Servo:Built-in 14bit Four Wire Digital High Precision Magnetic Encoding Angle Senso.DC6V-8.4V Direct Power Servo,Ideal for 1/8 1/10 1/12 Buggy,Monster Car,Robot,RC Car,Boat,Airplane,Helicopter,On-road,Off-road etc.
Se komplette oplysninger

EX1650MGX High Speed Brushless Servo

Product Description

2024 Version Reinforced steel Oblique Gears,Thickened Pins Shaft,More Stable and Durable,Three Ball Bearings,Excellent Linearity,Precise Control,Optimizes the Motor Speed and Starting Current.

Sincecam EX1650MGX Adopts High-performance Durable Brushless Motor,14bit Four-wire Digital High Accuracy Magnetic Coded Angle Sensor,Programmable Digital Servos,High Precision Reinforced Steel Oblique Gears Design,Excellent Linearity,Precise Control,Stable,Low-noise,The body measures only 38mm.Fastest Speed 0.08sec/60°@8.4V

When You Travel Through the Mountains and Pass by the Charming Streams,IP67 Waterproof Dustproof Design Allows Your Model to Play with the River. All Aluminum Case, Middle and Bottom Shells Increase the Heat Sink Process, So that the Internal Structure of the Servo Absorbs Heat Evenly and Runs Smoothly. Which Makes Your Model Give Full Play to its Handsome Charm.

The Factory Default "Standard Mode", SR/SSR/SFR Modes need to be changed through the EX619BT Pro programming card to change the working mode of the servo. The remote control must also support SR/SSR/SFR mode.

Suitable for 1/8 1/10 1/12 RC Cars,Crawler,Buggy,Monster Car,Robot,Boat,Airplane,Helicopter,On-road,Off-road Upgrade Kits.

Feature

  • Three Ball Bearings
  • Reinforced Steel Oblique Gears
  • High Efficiency Long Life Brushless Motor
  • IP67 Waterproof,Dustproof Design
  • Body size shortened to 38mm.
  • Compatible with SR/SSR/SFR.

Available for Parameter Programmable via EX619BT Pro Programmer

    Stall Torque
    • 6.0V@ 36kg-cm (499oz-in)
    • 7.4V@ 46kg-cm (638oz-in)
    • 8.4V@ 50kg-cm (694oz-in)
    Operating Speed
    • 6.0V@ 0.12sec / 60°
    • 7.4V@ 0.09sec / 60°
    • 8.4V@ 0.08sec / 60°

    Idle Current

    • 6.0V@ 20mA
    • 7.4V@ 25mA
    • 8.4V@ 30mA

    Running Current (no load)

    • 6.0V@ 450mA
    • 7.4V@ 600mA
    • 8.4V@ 700mA

    Stall Current (at locked)

    • 6.0V@ 4200mA
    • 7.4V@ 5600mA
    • 8.4V@ 6000mA
    Specification
    • Operating Angle:180° ±3°(14bit ENCODER)
    • Control System:PWM Control(1520 uSec in the central point)
    • Pulse Width:500 to 2500 uSec
    • Working Frequency:50-2000Hz
    • Dead Band:2uSec
    • Operating Tamperature:-20℃~+70℃
    • Bearing:Three Ball Bearings
    • Horn Gear Splial:∅6.0-25T
    • Connector Wire:22AWG 300mm JR Silicone Wire
    • Dimension:40x20x38mm(1.57 x 0.78 x 1.5in)
    • Weight:80g (0.176 Pounds)
    Package Included
    • 1 x EX1650MGX Steering Servo
    • 1 x 25T Metal Servo Arms
    • 2 x Screw M2x8
    • 2 x Screw M3x6

    EX1650MGX Brushless Servo

    EX1650MGX Digital Brushless Servo Parameter Table and External 2D Dimensions File Download

    A PERSONALIZED SERVO

    Design your own Sincecam RC servo, laser engrave your favorite servo with your own text or pattern content.