SC1250MGX 12.6V Brushless Steering Servo
Product Description
2024 Version Reinforced steel Oblique Gears,Thickened Pins Shaft,More Stable and Durable,Three Ball Bearings,Excellent Linearity,Precise Control,Optimizes the Motor Speed and Starting Current.
Sincecam SC1250MGX is 3S 12.6V Direct Power servo,Adopts High-performance Durable Brushless Motor,14bit Four-wire Digital High Accuracy Magnetic Coded Angle Sensor,Programmable Digital Servos,High Precision Reinforced Steel Helical Gears Design,Excellent Linearity,Precise Control,Stable,Low-noise,Fastest Speed up 0.08sec/60°@12.6V.
When You Travel Through the Mountains and Pass by the Charming Streams,IP67 Waterproof Dustproof Design Allows Your Model to Play with the River. All Aluminum Case, Middle and Bottom Shells Increase the Heat Sink Process, So that the Internal Structure of the Servo Absorbs Heat Evenly and Runs Smoothly. Which Makes Your Model Give Full Play to its Handsome Charm.
The Factory Default "Standard Mode", SR/SSR/SFR Modes need to be changed through the EX619BT Pro programming card to change the working mode of the servo. The remote control must also support SR/SSR/SFR mode.
Suitable for 1/8 1/10 1/12 RC Cars,Crawler,Buggy,Monster Car,Robot,Boat,Airplane,Helicopter,On-road,Off-road Upgrade Kits.
Feature
2024 Version Reinforced steel Oblique Gears,Thickened Pins Shaft,More Stable and Durable,Three Ball Bearings,Excellent Linearity,Precise Control,Optimizes the Motor Speed and Starting Current.
Sincecam SC1250MGX is 3S 12.6V Direct Power servo,Adopts High-performance Durable Brushless Motor,14bit Four-wire Digital High Accuracy Magnetic Coded Angle Sensor,Programmable Digital Servos,High Precision Reinforced Steel Helical Gears Design,Excellent Linearity,Precise Control,Stable,Low-noise,Fastest Speed up 0.08sec/60°@12.6V.
When You Travel Through the Mountains and Pass by the Charming Streams,IP67 Waterproof Dustproof Design Allows Your Model to Play with the River. All Aluminum Case, Middle and Bottom Shells Increase the Heat Sink Process, So that the Internal Structure of the Servo Absorbs Heat Evenly and Runs Smoothly. Which Makes Your Model Give Full Play to its Handsome Charm.
The Factory Default "Standard Mode", SR/SSR/SFR Modes need to be changed through the EX619BT Pro programming card to change the working mode of the servo. The remote control must also support SR/SSR/SFR mode.
Suitable for 1/8 1/10 1/12 RC Cars,Crawler,Buggy,Monster Car,Robot,Boat,Airplane,Helicopter,On-road,Off-road Upgrade Kits.
Feature
- Three Ball Bearings
- Reinforced Steel Helical Gears
- High Efficiency Long Life Brushless Motor
- IP67 Waterproof Dustproof Design
- Body size shortened to 40.5mm.
- Compatible with SR/SSR/SFR.
- 7.4V@ 30kg-cm (416oz-in)
- 8.4V@ 35kg-cm (486oz-in)
- 11.1V@ 45kg-cm (625oz-in)
- 12.6V@ 50kg-cm (694oz-in)
- 7.4V@ 0.14sec / 60°
- 8.4V@ 0.12sec / 60°
- 11.1V@ 0.09sec / 60°
- 12.6V@ 0.08sec / 60
- 7.4V@ 3000mAh
- 8.4V@ 3300mAh
- 11.1V@ 4000mAh
- 12.6V@ 4500mAh
- Operating Angle:180° ±3°(14bit ENCODER)
- Control System:PWM Control(1520 uSec in the central point)
- Pulse Width:500 to 2500 uSec
- Working Frequency:50-2000Hz
- Dead Band:2uSec
- Operating Tamperature:-20℃~+70℃
- Bearing:Three Ball Bearings
- Horn Gear Splial:∅6.0-25T
- Connector Wire:22AWG 300mm JR Silicone Wire
- Dimension:40x20x40.5mm(1.57 x 0.78 x 1.59in)
- Weight:80g (0.176 Pounds)
- 1 x SC1250MGX 3S Servo
- 1 x 25T Metal Arms
- 2 x Screw M2x8
- 2 x Screw M3x6